April 18, 2022
Description
This is an adjustable version of my one piece 5015 fan duct assembly with 40mm hotend fan. It is designed so that the 4010 fan housing mounts using the top two original fan shroud mounts and then the fan ducts are adjusted and secured using the outer two screws.
It is highly recommended to resin print this model with High Temp Resin..
All screw holes are modeled to M3 but will most likely need to have a tap run down them to clean up the threads.
****UPDATE 06/15/2023 ****
Added Version of cooling duct compatible with E3D REVO CR and Revo Belt Nozzles.
License:
Creative Commons - Attribution
NAK3DDesigns
