Knob stem for Zanussi dishwasher

Tested for Zanussi Dishwasher Model ZDI6041W (PNC 911921001/01)

The slot/stem for the program selection dial broke. The dial itself with the labels was fine, so I didn't remodel that part.

The print fits very snug on the +-shaped stem; depending on your printer accuracy you may need to tweak the blend file or slicer settings to make it fit.

(I've added a 3mm diameter hole where you can add a M3 screw so you can easily print small segments for test fitting, without having to disassemble the dishwasher. front panel)

The slightly segment of the +-stem corresponds with the indicator on the dial knob (C)

To fit the original indicator on the print I cut most of the remaining parts off and filled the empty space from the dial-grip with hot glue.