Joying 1 din display holder

Display holder for Joying 11.6" Snapdragon 1 din unit

Type1: With tilt up and down. Fixed distance between display and unit 45mm.

Type1B: Straight without tilting but with adjustable distance.

Type2: Simple without dash cover with adjustable distance between display and unit. Also is with adjustable vertical distance between clips to be resize for 2Din unit.

It will probably fit for other models and screen sizes.
The distance between the bolts on the display itself (WidthDisplHoles) can be changed in the parametric menu for other models.

Must be printed by PET or ASA, ABS.
If you are going to print it from ASA, ABS should be borne in mind that the model will shrink after cooling, so two of the sizes (DWidth and WidthDislHoles) should be increased by 1 mm in the parametric menu.
You need an additional 8 pcs. 3x10mm screws for plastic DIN7981 and 4 pcs. M5x20mm with nuts for tilting version.