Summary

Remix of a AE B6 waterfall fan mount modified for a YZ-2 (CA L2). This is a WIP and I am having some issues with strength/durability of this part. May have to try printing it in a stronger material than the Carbon Fiber PLA.

Uses all 3 chassis mount holes. Base of the mount is extended 2mm to eliminate the need for spacers under the brace. If you are going to use this with the LC/LD transmissions or without spacers then you will need to remove 2mm from base.

Next revision will center the fan in the chassis, beef up the side supports around the fan and around the transmission mount.

remix of AE B6 fan mount

V1.4.1 centered the fan and beefed up some areas for more strength

Print Settings

Printer:

Ender 3

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Ziro Carbon Fiber PLA                Gray                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>having durability issues.  next versions will address those</p></div>

Post-Printing

placed in heated oven at 155 degrees F / 70 degrees C and allowed to cool to room temp. Goal is to add some strength by "annealing" the print

Yokomo YZ-2 Waterfall brace / fan mount WIP

Yokomo YZ-2 Waterfall brace / fan mount WIP

Related Models