Ergonomic Headset holder

There are two versions of the headset holder. One needs supports and the other one has a flat back that doesn't needs supports when printet horizontally.

Printer:
Sidewinder x1

Filament material:
PLA

Print Time:
Vertical position: 22 hours 48 minutes
Horizontal position: 17 hours 52 minutes

Print settings:

Layer Height: 0.16mm
Wall Thickness: 1.32mm
Wall Line Count: 3
Top/Bottom Thickness: 1.32mm
Top/Bottom Layers: 4

Infill Density: 20%
Infill Pattern: Gyroid

Printing Temperature: 200 C
Build Plate Temerature: 60

Print Speed: 60mm/s
Top/Bottom Speed: 30mm/s
Initial Layer Speed: 20mm/s

Support: only with the design that needs supports
Support Density: 20%

Brim: Yes
Brim Line Count: 10