Beaglecam lens adjust holder bracket

Beagle Camera lens adjust holder bracket

This is the bracket that assists in changing the focus of the Beagle Camera.

1. The support arm is mainly for auxiliary positioning, so that the camera and the calibration map are attached to the wall perpendicularly
2. The camera is rotated and fixed by the following two raised points. After fixing, the starting point of the lens can be confirmed through the end face of the bracket. Based on this, the position of 30cm or other distances can be obtained with an auxiliary ruler.

There is a cut gcode file in the file(6h.46min). If your printer's format is greater than or equal to 220x220mm, you can print it directly.

Enjoy it.
Kim.