Aesthetic Top Cover Sermoon D1

Top cover for the Creality Sermoon D1. A pyramid shaped enclosure made from acrylic for a more aesthetic look. I wanted to maintain some of the sermoons looks and not just put a box on it so i designed my own cover.

BOM
4 x TOP CORNER.stl
4 x BOTTOM CORNER.stl
2 x HANDLE.stl

2 x FRONT_BACK.dxf
1 x LEFT.dxf
1 x RIGHT.dxf
1 x TOP.dxf
Or 1 x TOP COVER DXF.dxf
Made in acrylic 3mm or any 3mm material.

12 x M5 x 16mm Flat Head Cap Screws + nuts and big washers (90 degree)
16 x M4 x 12mm Flat Head Cap Screws + nuts and big washers (90 Degree)
4 x M6 x 12 mm Round Head for the handles
4 x M6 x L8.3 x D8.3 inserts for the handles.

Rubber list around the outer perimeter, size doesn't matter i used 16 x 4 mm with self-adhesive tape. I ordered the acrylic laser cuts form a company with the included dxf files, I also included a big dxf with all parts in one file. But if you want to cut by hand I included schematics. The fasteners can be longer. I you decide to laser cut check that the dimensions are uploaded correctly.

Good luck!