June 1, 2022
Description
The zipper on my bag was a cheap zinc-nickel blend that just disintegrated one day, I looked for other zippers to print and many are on here and are nice but didn't fit my need.
This is a 2 piece zipper that is easier to install on a bag that doesn't have an exposed end like on a jacket. Screw in from the back directly on the zipper and have fun!
I had the original pull tabs so I just paused the print before it closed off and just slotted in the pull tabs.
Hardware Required:
M2 8mm screw x2
If you don't have a pull tab or need one as my design doesn't include one, I suggest this one remixed by sotenck as a pull tab
https://www.thingiverse.com/thing:1849862
License:
Creative Commons - Attribution - Non-Commercial
Phat32
![[with release hole] Zipper Pull using paperclip preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/06/64/c0/f7/d6/f8524436-aa8f-48cb-b115-563bf28cca2b.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/06/64/c0/f7/d6/f8524436-aa8f-48cb-b115-563bf28cca2b.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "[with release hole] Zipper Pull using paperclip preview image")
