Ender 6 LGX Lite mount

2 piece mount to fit LGX Lite to Ender 6

part A, the base plate is mounted to carriage, then lgx mounted to part b, then bolted to the base plate.
there is also a part to zip tie the wiring to.

printed parts weigh less than 30 grams

use 4 walls, at least 30% gyroid infill and .2 layer height. No supprts needed, just change the orientation in the slicer so they are flat on the back

when installing the LGX on the ender 6, yuou will need to swap the red and green wires at the plug for it to extrude in the right direction, you will also need to adjust the vref.