Wild Liger - Zoids

My take on the original Wild Liger - the naturally evolved Liger that gave rise to the Liger Zero and its variants.

Modeled in ZBrush and currently printing on my Elegoo Saturn.
Let me know if you have any trouble with it.
Designed to be articulated with the Koto M.S.G Joint sets B and E.

You need 1 of the Joint Set B & E.
I used: Mecha Supply 19 type E and Mecha Supply 06 Joint Set B.

You just need the ball joints from B and the normal elbow joints from E.

Have uploaded chitubox project files with pre-supported and pre-hollowed parts. both in RAR file as the second plated file was too big. -_-

Please, please hollow otherwise you'll loose a tonne of resin. :D

Edit:

I've gone back in and beefed up the body and the front an rear lower legs, to make it more accurate to the original models.
Big thanks to SteelRain from the Discord server, for pointing out the inaccuracies and helping me correct them! I really appreciate it!!:D|

Please use these parts instead of their original counterparts already uploaded, for a more accurate model. :)

Upon printing the pre-hollowed files myself, from the chitubox files I can recommend - NOT to use them!!

I have hollowed them out too far - they need much thicker walls - 1.5mm or greater, to print without failure.

Please use the NEW chitubox files named: WLPlated3 and 4 - they have the thicker walls and print well.

Good luck and I hope to see some Wild Ligers soon!! :)