June 10, 2022
Description
even easier to print - only little support is needed.
the parts were all modified. a straight bent paper clip can be used as shaft for the lid or a steel wire (0.8mm).
there is a hole on the lid for inserting the shaft. this is then sealed with glue.
2 countersunk screws M3 x 10mm serve as axles for the wheels.
due to the modifications, the garbage can survives a rougher playing time and is very easy to print.
two versions of wheels - which you like more.
bucket v2&3: other version looks better/more like a trash can, but not as stable and harder to print.
tighten the bolts for the wheels and then back off 1/2 turn to allow the wheels to turn.
License:
Creative Commons - Attribution - Non-Commercial
hallo_ralph
