Summary

Here's a intermediate gear reduction 50T to 24T for HTD5 belt

Print with 6 walls and 6 tops/bottoms (for at least 1.44mm width)

The 6 vertical holes are meant to get M3 threads as re-inforcement

The axle will be a M8 thread mounted on 608ZZ bearings

Print Settings

Printer:

Hypercube

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.12</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20% honeycomb (in this configuration, it will be stronger than gyroïd</p></div></p>                                                    <strong>Filament:</strong> Whatever PET but I'll try PLA                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>With my params (6walls and 1.44mm tops/bottoms) the reducer weighs arround 85gr</p></div>

Post-Printing

Tap the 6 holes to fit M3 threads or screws (length: 42mm)

HTD5 - 24-to-50T reduction

HTD5 - 24-to-50T reduction

Related Models