Oculus Quest 2 Putter Mount for VR Mini Golf

This mount was specifically designed for use with Walkabout Mini Golf on the Oculus Quest 2, and is intended to (more or less) map the angle of the physical putter to the in-game virtual putter. As such, it might not map as well to clubs in other putting games.

The mount needs to be printed in a flexible material, ideally a high shore hardness rating TPU - the Oculus controller is held in place by friction fit, so some give is preferable, and the club handle connector needs to flex to it can be tightened up sufficiently. Too flexible, though, and the controller is liable wobble, which might mess up your stroke...

The handle of putter that I am using is 18-19mm at the mounting point, and I am using two 20mm M3 bolts with nylon lock nuts to secure the mount.

This mount is intended to hold the righthand controller, if you want one for the lefthand controller, just mirror the STL before printing.

IMPORTANT NOTE: This mount is for putting only, DO NOT use it for full club swings - the controller is only held in place by friction and is very likely to go flying if you attempt to use this mount with driving range games. So please don't do that.