Base Catan (3-4 players):
Print 3x each 3edge, 3edge-port, port-right, port-left
Pattern is 3edge, port-left, 3edge-port, port-right. (also refer to image)
Catan with 5-6 player expansion:
Print all pieces for Base Catan
Also print 2x more port-left and 2x "CatanBorderFat".
Not really pattern... but you can follow instructions on where ports should go or refer to images that I attached.
Important note, at 100% size, it seemed like the pieces were going to be too tight, so I started printing some at 101% (if I had to guess I would say about 1/2 of them). Everything fits together pretty well and is not too loose.
It should be noted that none of these pieces are intended to be magnetic, but they are designed to be used with the
settlers catan style (magnetic) make by @Dakanzla .
I decided that magnets were too expensive and troublesome to work with, so instead I printed out the interlocking border. I like that the pieces are thicker so I have no regrets, and the interlocking border from @ericakerfuffled worked nicely. However, my print bed was too small. So, I separated each piece into its own file.
For some reason there were holes after I imported them into thinkercad. I am not sure if they were in the original model or if I introduced them on import. Anyway, I did my best to fix the holes but there are still a few small ones remaining. I ended up deciding they were acceptable (you don't really notice them when the board is built) so I didn't continue working on it. Feel free to remix them if you want on thinkercad and/or dm me and I will update.
sansidious
