Raspberry Pi N64 game cartridge fan shroud

Big fan (no pun intended) of elhuff's n64 pi case and thought it was cool to mount a fan inside the game cartridge instead of it sitting inside the case attached to the bottom of the case top. Decided on using a 30mm x 7mm mini blower fan that could fit inside the cartridge with a little bit of modifications to the thickness of the cartridge. Two screw holes are seen in front that accommodate the screws specifically for the Wathai 3007 fan (linked at the bottom), which are covered with the cartridge label to hide them. The back of the cartridge has two holes for the nuts, purposely made slightly smaller than the nut so you can heat it up and embed them for better purchase. The wire connected to the fan had to be relocated since it wouldn't allow the fan to fit inside the cartridge, so I took the faceplate off of it, ran the wire inside of it and superglued it to the side of the fan box to keep it from hitting the fan. Cartridge will need to be glued down in place for it sits a bit loose in the cartridge hole on the pi case.

https://a.co/d/7gXvR0c <----- Wathai Fan