Rc car wheels, rims, slicks / drifting and sand tires, 1:16

Saw a video of somebody that put slicks / drift tires on their rc car and I thought Id give it a go to make something similar that I could print

So, made rims, with the holes for the tires made for an m4 tap, dont know if you can tap the holes just by using an m4 screw.

The rims needs to be printed with supports touching the buildplate, due to the whole for the nut.

The wheels are made so that they can be change without removing the rims, as the wheels probably will wear down faster then the rims.

3 m4x20 screws needed per rim and wheel.
"Slicks" / drift tires and sand tires included.

I recommend you print the "test" files to see that your parts comes out nice as they do take quite a lot of material to print.

None of the parts have been tested so use at your own risk.

Tinkercad link for anyone who want to tinker:
https://www.tinkercad.com/things/ix5VwzphrDX?sharecode=TLMK70wOfqH3JZneZSWISkIC59rO0iDHMm6JL725TnY