DOOM (2016) Super Shotgun (improved and scaled)

This is the super shotgun from the DOOM game which came out 2016.

It has a working hinge mechanism, which relies on magnets, so you can open it and load it with shotgun shells.
Note that the shotgun from doom eternal looks a little bit different, this one is more of a classic shotgun.

Size: About 69 cm length (nice)

Instructions

The following items must be printed twice, once normally and the second time mirrored:

• Handle.stl
• Hinge.stl
• Hinge_Handle_Part.stl

The pieces are connected with some pegs:

• 16x big pegs
• 4x small pegs

The following files have holes for 6 neodym magnets with 4 x 3mm:

• Lock_with_Magnet_holes.stl
• Rear_Barrels_with_Magnet_Holes.stl
  (If you do not want magnet holes take these two files from the original and print them at 40% scale it still should be compatible with my remix)

I used these magnets (only available in the EU):
https://www.amazon.de/First4magnets-F334-25-N42-Neodym-Magneten-Durchmesser/dp/B003MWAIUK?&linkCode=sl1&tag=whateverprint-21&linkId=f3edf2e7bacb363f66730d123d0f149c&language=de_DE&ref_=as_li_ss_tl

There is also a place underneath the rear barrel to add bigger magnets with about 2 cm diameter. See the pictures.

Why the Remix?

The original is already quite good, but there was some room for improvement.
Here is list of things that I did to improve it:

• Changed the size of every piece to 40% of the original scaling (everyone from the original recommended this scale)
• Added holes for little 4x3mm neodym magnets
• Split the handle into two separate pieces, to make print layers look better and to fit it on smaller printers
• Added shotgun shells (with and without engraving)
• Engraved the sign of doom on the handle thing (it is not there in the game, but I thought it looks cool)
• Merged a few files to simply one file, as they had to be glued together otherwise
• Optimized every file for printing:
  • Changed the orientations to a recommended print position
  • Made surfaces which needs to lie on the ground flat
  • Get rid of errors in the model (there were Cura warnings for a few files)
  • Improved fitment of some parts
• Other minor improvements

If you want to hang the shotgun onto the wall I recommend my wall hanger thing:
https://www.thingiverse.com/thing:5427258

If you are interested in a detailed build log of my DOOM Slayer cosplay visit this thread:
https://www.405th.com/forums/threads/yet-another-doom-slayer-praetor-suit-2016-build.52519/

Big thanks to Brendan Lautissier the creator of the original model, as it was already quite good. I just added a few more hours of work to make it perfect.

Check out my profile for more cosplay parts of the doom slayer.
I have some exclusive models on cults3D as well:
https://cults3d.com/en/design-collections/WhateverPrints/doom-slayer-cosplay-parts