3.5 Hard Drive Rail Generic/Corsair Spec

Was made for Corsair Carbide Spec 02 HDD enclosure but is a standard size that may fit other things. Printed in 0.16 layer height for finer stubs. Print 2 on their side and does not need to be mirrored for left and right. I used a bit of supports on the 2 stubs and non on the latch.
120mm rail height

If you need to edit:
https://www.tinkercad.com/things/0HSJH777Kfq?sharecode=M2nFCMfub2HwEl700iC9bb-M82nHG8sCBhwpRx8sVLM