Summary

Here is a simple design to hold a 2.5'' SSD drive below a Raspberry Pi 4 Coupe Case.

In order for the Pi to have air flow, the SSD is held away from the base.

This was designed to be used with a Pi running Home Assistant, replacing the SD card with the SSD.

I replaced the plastic nuts and bolts with 30mm M3 bolts and screwed straight into the plastic, no nut needed.

I printed this in PETG but any material would suit. You may need to print with a brim as it's only a few walls think.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>N/A</p></div></p>                                                    <strong>Filament:</strong> eSun PETG                Yellow                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>A brim may be needed, as only a few walls thick and may lift. YMMV</p></div>

Pimoroni Pibow Coupe 4 case SSD mount 2.5 inch drive for Raspberry Pi 4

Pimoroni Pibow Coupe 4 case SSD mount 2.5 inch drive for Raspberry Pi 4

Related Models