Summary

These are 3D models of the circuit board holders for the Russian-made Agat-9 computer. There are 2 models - front and back holders. Use the screws with wide flat heads (for example PC screws that were used for floppy drives or CD-ROMs) to fit the holders onto the board. You will need 2 nuts too. The same screws can be used to secure the board onto the metal rails.

If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page:

https://www.thingiverse.com/Wierzbowsky/designs

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>All-metal Mega</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> Tianse PLA                Black

Agat-9 Board Holders

Agat-9 Board Holders

Related Models