Batman 2X

I wanted to print characters that are 2 times normal size,
I adapted Figurine Remixed from
https://www.thingiverse.com/thing:2410047
Doubling up the size and make various tweaks to smooth out some things,
changed the hands a bit and a little more support on the arms.
(I tried with the Giant versions, but the peg design of the arms make it very
hard to assemble when reduced in size, so the one piece arms are better.)

Putting on the arms I use a little veg oil on the body holes,
the arms will go in with a bit of pressure.
I used some White Tape on inside of mask for eyes.

Batman
Used various items from
https://www.thingiverse.com/thing:2267027
utility belts and Cowl(modified to fit)
For a wrap around belt on the body start with yellow for 3mm then
switch to black

Supports are built in, except on the cowl, you should print with some supports for the best results

use the JPG of the cape as a pattern to cut out a cape out of black craft foam sheet,
or you can convert it into a thin shape to print in 2 or 3 layers flat and then use a blow dryer to shape as you put it on.