Superman 2X

I wanted to print characters that are 2 times normal size,
I adapted Supernova_6969's Figurine Remixed
https://www.thingiverse.com/thing:2410047
Doubling up the size and make various tweaks to smooth out some things,
changed the hands a bit and a little more support on the arms.
(I tried with the Giant versions, but the peg design of the arms make it very
hard to assemble when reduced in size, so the one piece arms are better.)

Putting on the arms I use a little veg oil on the body holes,
the arms will go in with a bit of pressure.

Used Chest design from rcaslis
http://www.thingiverse.com/thing:2047694
When Printing Torso start with yellow to create the belt then switch to
Blue where you want the belt to stop.

Redid the Superman Emblem
start with Yellow filament then change to red where S starts.

modified Fringe Curl Superman hair From skimbal
https://www.thingiverse.com/thing:446354

Legs start with Red and then when you think the boots are tall enough, switch to blue

Use pattern included to cut out cape from whatever you would like to use, I used a Foam Sheet
(you could also extrude it a bit and print it 2 or 3 layers thick in pla then use Hair Dryer to shape.)