The Batman - 2X

I wanted to print characters that are 2 times normal size,
I adapted Supernova_6969's Figurine Remixed
https://www.thingiverse.com/thing:2410047
Doubling up the size and make various tweaks to smooth out some things,
changed the hands a bit and a little more support on the arms.
(I tried with the Giant versions, but the peg design of the arms make it very
hard to assemble when reduced in size, so the one piece arms are better.)

Putting on the arms I use a little veg oil on the body holes,
the arms will go in with a bit of pressure.
I used some White Tape on inside of mask for eyes.

Batman
Used various items from simulatedsimian's Giant Batman,
https://www.thingiverse.com/thing:2267027
Logo, utility belts and Cowl(modified to fit)
For a wrap around belt on the body start with yellow for 3mm then
switch to black

Supports are built in, except on the cowl, you should print with some supports for the best results

Use the Cape Jpg as pattern to cut out matrial for cape, I used a craft foam sheet.
You can also extrude the cape with software then print it 2 or 3 layers thick
and shape with a blow dryer.