Chess & Checkers & Nine Men's Morris Board (w/Storage Box)

Et voilà, I present you a box for your chess set and checkers tokens that comes with a chess and nine men's morris board integrated into the lid! But that's not all, it also comes with a checkers token. (No chess set included as of now, please see below.)

PLEASE NOTE:

• Other than elsewhere, size DOES matter with this design. The box is 250 mm x 250 mm, that is without any brim, which you will likely need. Finally something to put your big machine to good use! (So, my apologies, I am not inclined to split anything to accomodate smaller printers, because I wanted something without any unnecessary seams and/or assembly.)

• The tiles are 30 mm x 30 mm and will accomodate chess pieces and checkers tokens of up to 24 mm base diameter easily. (Of course, you could use larger pieces if you want some Tokyo subway flair in your chess games.)

• The height of your chess pieces can be up to around 60 mm. Larger pieces might result in a re-enactment of the French revolution when closing the lid, including royal beheadings.

• The holes in the nine men's morris board have a 25 mm diameter. The checkers token included here has a 24 mm diameter and will fit perfectly.

• The box bottom inlays are basically optional - you could go without them and not worry about the most fiddly part of the assembly. They have two versions - each has a mirrored one, because that is how I essentially designed them. You will need some glue to make them stick (probably not for queens and pawns.) Please also refer to the post printing section.

• I recommend using M3x6 screws for assembling the lid. While you can use up to 18 screws to feel safe, 12 were enough for me (4 in the middle, 2 in each corner). Alternatively, you can just glue it together.