August 17, 2022
Description
A clamp-mount for the bottom mounting point of a pannier rack, in case you don't have one, or in my case, if the screw sheared off.
you will need two M4 threaded inserts for the clamp, 2 M4x16 screws for the clamp, and 1 M5x35 to attach it to the rack.
I printed this in polycarbonate, but PETG should probably suffice, I would not recommend PLA, although it will probably work, it might not be strong enough
used in this project:
https://www.youtube.com/watch?v=2umTe2oBxts
License:
Creative Commons - Attribution
1,167
noah_makes_things
