August 21, 2022
Description
Small animation may help you:
可供参考的小动画：
(EN) https://youtu.be/6pae-1EZ4nA
(中文) https://youtu.be/wRnNOpNQPm8
"OSPREY"A1 modded parts
“鱼鹰”A1 改件
https://www.thingiverse.com/thing:5487188
2022.09.09 update
Upload a rar pack called "AlumPipeDrillingHelper",which can help you drill those 2 holes on that OD12 ID10 pipe.Not a necessity.
2000.09.09更新
上传了一个rar文件包“AlumPipeDrillingHelper”，能让你在那根外径12内径10的管子上打孔简单点。如果你要打20份五金包，那你大概会需要这个。
2022.09.05 update
SORRY I forgot to exprort one small partof this blaster.
This part has been exported as "34_TriggerLimit.stl".
Now the files are comepleted,I think...
Just download the RAR file for all STLs.
2022.09.05更新
非常抱歉我导出时漏了个件。
现在给他补上了，名字叫做“34_TriggerLimit.stl”。
文件现在大概是齐了吧。
还是，下载rar压缩包，里边啥都有。
"OSPREY" is an air-pressure driven nerf dart blaster.
Use the 13mm short dart.
Runs about 180 fps with Worker dart.
First Nerf blaster designed by myself,lots of improvement to be made later.
“鱼鹰”是压气式软弹发射器。
设计使用13mm短弹。
原厂跑分55左右，使用工匠弹。
这是我完全自己设计的第一把，之后会有许多改件的。
2022.08.22 update
Just download "OSPREY鱼鹰.rar" ,all STL files with assemble instructions are included.
For this blaster,I used ZhuoPu PLA, 40% infill,with 2mm wall,this make it quite strong.
(As I believed,wall thickness affects these model's structural strength more than infill percentage,especially those parts with few infill space.)
"FishingLineBarrel.stl" and "BoltHandleDrillingHelper.stl" are optional.
One is the rifiling barrel speiclly designed for this blaster,
One may help you machining the Bolt Handle metioned in the instruction pdf.
2022.08.22更新
请直接下载“OSPREY鱼鹰.rar”，这个压缩包内包含所有STL文件还有组装说明。
这把发射器我打印时用的是卓普pla，打的40%填充，2mm壁厚，打出来是很结实的。
（我的想法是，壁厚对零件强度的影响要大于填充，特别是这些本来就没啥填充的打印件。）
"FishingLineBarrel.stl"还有"BoltHandleDrillingHelper.stl"这俩是可选的。
一个是给这把发射器专门设计的鱼线管，
另一个是在你给拉栓里那根铝棒打孔时可能会用到的辅助工具。
License:
Creative Commons - Attribution - Non-Commercial
3,359
YoursKatiaRomanova
