Rengoku Sword Fixed Habaki and Longer

30/8/2022 Also the Tang will not fit inside the handle without extenstive sanding and cutting. So if you wanna edit the tang to be smaller go ahead or just cut around the rod you insert and glue inside the blade pieces.

Note REMEMBER TO MIRROR THE BLADE IF YOU WANT IT TO BE ACCURATE.
However I didnt do that so its not exactly needed.

Files and descriptions (Grouped)
-Blade_withHole : Original sized blade with a Hole cut in the centre for a metal rod. Just a take a segment of the blade to the store with you to find the right thickness for the rod
-Cylinder File I used to cut the hole in Blender. Not actually useful for you.
-Fuchi Top Part of the Handle (Bellow the guard (TSUBA))
-Habaki_Fixed Part that goes above the guard on the blade.
-Kashira Pommel Bottom of the handle.
-Longer blade Longer Blade (40 % longer) With no channel for the rod.
-Longer blade with holes Part A-D These are the blades cut into segments with holes for the rod.
-Longer Blade with Holes D-2 This has a channel for the rod what goes beyond the base (GREAT FOR STRENGTH!)
-Longer Blade With Holes (40 % longer) With a channel for the rod.
-Longer Handle (Longer Handle)
-Tsuba Guard.

What I wanted from the remix:
1 The Habaki had holes in it I wanted to fix it thus print it 2% larger so it can actually fit on the blade.
2 I wanted it 40 CM Longer than it was, This made inserting a steel rod easier because I didnt have to cut it much. Plus its cooler if its longer right?

I have dropped the sword I made, hit the ceiling and a glass chandelier. Currently its not broken.

Also the Hilt is longer to reflect the fact the sword is also longer. I think it looks better that way.

Side note the tang on Part D: I used D-2 since I had a very long rod.