September 10, 2022
Description
An additional mount for the Z motors on the Adimlab Gantry printer.
Hardware:
2 M3 x 12 screws for the motor
2 M4 x 8 screws to mount on the 2020 extrusion
2 M4 t-nuts
Install
Put M3 screws in
Put on motor and start M3 screws
Push t-nuts into the extrusion and align with hole
Carefully install M4 screw and get started in t-nut
Tighten all screws, but be careful not to overtighten
License:
Creative Commons - Attribution
jonbourg
