Wireless QI Charging Shelf Station

A wall-mounted USB charging shelf for use with the Superdanny Fast Charger that I purchased on Amazon.

I added some cable holders printed from flexible TPU filament on the sides, and a lower platform to hold any additional devices that may need charging.

A 90° power adapter is used to prevent the charging cord from running into the wall.

It has a removable faceplate which I printed using a strategic filament swap a few layers up, which isn't strictly necessary.

I cut the lower shelf from some 1/4" plywood I had laying around and stained black, but you could easily 3D print it if you wanted to.

I added a few beads of hot glue to hold the faceplate to the shelf, the charger to the shelf, and the shelf to the brackets.

Finally, I purchased some shorter USB cables so they wouldn't get annoying. The ideal length in my experience is 7 inches (18 cm) or greater.

Purchase links:

Shelf: https://www.amazon.com/gp/product/B0865XYB8Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

90° IEC-320 C7-to-C8 Power Adapter: https://www.amazon.com/gp/product/B07D13D3YR/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1

7-inch Micro USB Cables:
https://www.amazon.com/gp/product/B01FSYBQ9Q/ref=ppx_yo_dt_b_asin_image_o04_s00?ie=UTF8&th=1

8-inch USB-C Cables:
https://www.amazon.com/SUMPK-Charging-Transfer-Charger-Compatible/dp/B0976MM5HS/ref=sr_1_11?crid=24QQOOIOPZMG7&keywords=usb+c+short&qid=1662951743&sprefix=usb+c+shor%2Caps%2C122&sr=8-11