September 15, 2022
Description
To achieve clean surfaces on both sides of the parts, all parts are cut in half. The flat side lies on the printer plate. This allows printing without any supports.
All star objects have 4 holes (Ø 2mm) on the back, where you can pull through threads for fastening with the help of a sewing needle!
In case you don't agree with the size of a certain part, you have the possibility to scale it up or down in the slicer software of your printer!
Except for „belt buckle.stl“ and „gun.stl“ one top and one bottom part must be printed. The individual parts are marked with T (top) and B (back) and an alignment sign (<). The top and bottom parts are then glued together flush with superglue.
When you have glued the parts. you can sand them - if necessary - with fine sandpaper, prime them and then paint them.
The following files must be printed 2x (for both arms, both shoes and both sides of the pistol):
arm_back.stl
arm_top.stl
shoe_back.stl
shoe_top.stl
gun.stl
License:
Creative Commons - Attribution
seabirdhh
