Poor Cycling Mechanics TL-BH62 - IMPROVED!

**UPDATE:
Buyer beware - I've had mixed results. The clamping mechansim isn't brilliant and your cable may slip continuously, needing readjusting to the point of cracking/breakage. But if in a dire situation and in quick need, this has your back.
**

Version "A" - minor modifications which should improve performance:
Shimano lines were slipping, cutter slot too narrow, <100% infill was breaking the walls.

Inspired by https://www.printables.com/de/model/238451-shimano-brake-hose-tool

A hydraulic brake line cutting guide and pin-driver / press-block.
Two versions: Print in-place and post-print nut insertion ("post-print" file and red pictures).

Alternative to the (expensive) Shimano TL-BH62 tool.

FEATURES

• Cutter guide front and back (1)
• Guide to shorten "olived" brake lines: Insert brake line, line up olive with edge (2), cut.
• Minimalist design

REQUIREMENTS

• 2x M5 bolt
• 3x M5 nut
• 1x M3 washer
• Loctite

BUILD

• drop-in of 2x M5 nuts during print OR insert after print (use "post-print" file)
• Loctite 3rd nut onto the driver bolt as a pin guide (4) - leaving ~1-2mm thread exposed
• cautiously break the clamp with a screw driver
• insert M3 washer into the clamp from the bottom through window into slot (acting as a push plate for the clamping bolt) (3)

Please note, the real-world picture depicts a previous/previous version. Most recent: red.