NP-F570 dummy battery for Black Magic Pocket 6K Pro

Dummy battery for the BlackMagic Pocket 6K Pro. Allows you to feed power from a larger battery straight to the camera, avoiding the 12V power input connector, thereby bypassing the need to boost the voltage to 12V.

You will need two 3.5mm grey wire end ferrules, which have a 3mm diameter approx. Remove the plastic insulation, and insert the metal ferrules into the two holes with the flanged end towards the edge of the battery. Solder two wires to the ferrules while ensuring that the solder and wires won't interfere when the contacts mate. Polarity is marked on the print.

Warning: Only use with 8V maximum! Do not feed higher voltage directly to the camera as it will damage it. Be careful when inserting the battery, ensure it can't get stuck and that everything fits properly.

This will not work with battery plates or monitors because it lacks the little side notches that NP-F batteries have. The Pocket 6K doesn't require them.