Conversion plate for Replacing Clarion CMD4 with Single DIN Radio

This is a plate that adapts the mounting area when converting from a Clarion CMD4 radio unit to a single DIN radio unit. This plate screws into the original mounting holes of the CMD4. (This is a very niche thing and is purely cosmetic.)

This cover plate may adapt other Clarion radio models if the mounting holes have the same spacing.

Choose only one of the STL files. Print with the face down to achieve a cleaner (or textured) visible surface. The chamfer on the sides is 60° (where 90° is vertical), so supports should not be needed even for the face-down STL.