Ryobi battery terminal - truck bed mounting for LED lights

I made up this battery mount for my Nissan Frontier truck bed. I am using it to power some 24V max LED light strips. The assembly mounts to the utility tracks in the back of my truck, which are about the same dimensions as Unistrut. Wiring is a simple two wire circuit, with a toggle switch. I do not have the P/N for the toggle. M3 hardware is needed to bolt it all together. Wire terminals were these:

https://www.amazon.com/Keystone-209-Battery-Contact-Plating/dp/B06VTPWM6M/ref=sr_1_2?crid=OMT2QLGSMH2F&keywords=209+contact&qid=1664190067&sprefix=209+cont%2Caps%2C762&sr=8-2

I don't have a P/N for the LED strips, they were a gift.

I used the battery interface, and terminal tower design from:

https://www.thingiverse.com/thing:3574224

Run time for this install, seems to be about 45 minutes of good illumination, after one hour, the battery is struggling. I used a 2ah battery, a 4ah obviously will run longer if needed.