3Dino Puzzle Museum DX Set Vol.2

This is Dinosaur Museum set that comes with puzzle stand to display up to three 3Dino Puzzles.
This set comes with a limited edition "Protoceratops" 3D puzzle.

Assemble the dinosaur puzzles and place as many puzzle stands as you like to complete your own dinosaur museum.
In addition to this set, other dinosaur puzzles have been released, and of course, the ones in this series can be displayed on the puzzle stand. Choose your favorite dinosaur from the links below.
https://www.thingiverse.com/stag_b/collections/3dino-puzzle-series

[3D Printing]
When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20,40 parts/packages, Tight applies to 30,50) For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.

[Print Settings]
Rafts:No
Supports:No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Pitch(Layer height): 0.1mm or 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s

[3D Print Time]

{Puzzle Stand}
Pitch 0.3mm: 5h43min
Pitch 0.1mm: 10h:58min

[Veloci]
Pitch 0.3mm: 1h16min
Pitch 0.1mm: 2h:25min

[Protocera]
Pitch 0.3mm: 1h20min
Pitch 0.1mm: 2h:33min

[Tylo]
Pitch 0.3mm: 1h24min
Pitch 0.1mm: 2h:43min

[Deino]
Pitch 0.3mm: 1h20min
Pitch 0.1mm: 2h:32min

[Dilopho]
Pitch 0.3mm: 1h34min
Pitch 0.1mm: 3h:03min

[Parasa]
Pitch 0.3mm: 1h20min
Pitch 0.1mm: 2h:31min