BOBOVR M2 Pro Hinge Lock for Quest 2

10/1 Update - I made a revision to the original design to make the sides taller so there is no chance of slipping. I have also found printing vertical solves the issue with the screw post possibly breaking so I would recommend printing vertical with supports. All models are now that direction by default.

I have also included two additional variations. A 6 degree and a 12 degree adjustment for the rear band down so they are held in that place without moving. Since the band is no longer straight that means both sides are different and requires two different parts. I included a degree marker and left right marker on the corresponding parts.

Additionally I included alternatives with the Oculus logo on the part.

---

The halo design of the BOBOVR H2 Pro is far more comfortable than a regular strap but because it includes a hinge for the back of the strap it likes to slip up while in use. If the back strap is locked in place then it cannot slip up with the hinge.

There is only 1 part included as the other side of the strap is just flipped so no change required. I do not know if this will fit the original BOBOVR H2 or H2 Plus strap. I only have the Pro.

I just printed in PLA and replaced the original hinge covers with the printed parts and used the same screw. I tried to re-enforce the screw post as much as I could without making it larger. I can possibly swap it out for a screw and captive nut if it looks like it would become an issue.