NSK Blade fanducts for FLSun SR

This model comes with the "quick install" plate. just losen the screws, slide the previous fanducts out then the new ones in, tighten, that's done !

Before printing, measure the distance between the bottom of the effector plate and the tip of your nozzle and ajust Z scale in your slicer if needed (2mm clearance above the tip of the nozzle is usually enough)

Printing tip:
Print the 2 fanducts at the same time, it will help the material cool better between two layers. You should obtain a better precission wih a a 0.12 layer height