Spinner and Nacelle Ring for Hobbyking Lancaster

The Hobbyking Lancaster bomber has a roughly 8mm gap between the front of the nacelles and the spinner, which is quite unsightly.

This will fill the gap while still providing an opening for a wrench on the prop driver when tightening the prop.

Glue it to the front of the nacelle with the opening for the wrench at the bottom.

The spinner fits the V3 motor shaft, and is designed to clear the Master Airscrew props. It is in two parts which need to be C/A'd together. The reason is to avoid needing supports which can mess up the surface that abuts the front of the motor shaft. You will need to mirror image the spinner (part A) for the reverse pitch props.