Valance Clip / Blinds Header Clip

These snap on easily and hold your blind headers on tight.

There are three options to print these:

Whole Body: (Strongest)

• Infill: 15%
• Layer Height: 0.2mm

Shell Only: (Strong Enough, Very light, Print Fast)

• Top/Bottom thickness: 0mm
• Walls: 2-3
• Infill: 0%

Spiralize/Vase Mode: (Works for light headers, prints in minutes or less)

• Spiralize Outer Contour: On
• Top/Bottom thickness: 0mm

I recommend not printing with a brim as it can make installation harder.