Simple Dice (16x16x16mm)

I was not satisfied with the plethora of dice available on this site. So, I designed these.

• 'Reasonably' sized at 16x16x16mm.
• Made specifically for 0.2mm layer-height.
• No supports required.
• Radius=±0.5mm edge-fillet.

All of the 'holes' will be printed identically, as they interact with the 0.2mm layer-height in the same way (-except, of course, for the 1 and 6 (-on bottom and top)). This helps produce better looking and feeling dice, especially when they are printed at such a small scale.

If you want more detail, print at 0.10mm layer-height and the 'holes' will also print identically, as mentioned above.

And, it might look even better if you paint inside the 'holes' with a contrasting color!

-Thanks for looking/printing!
-Peace.