Generic Sci Fi corridors for Paranoia and Star Wars RPG games for 28-32mm miniatures for Ender 3 printers

[Edit 30/12/2022]

I redesigned the room doorways so that the corridor doorways would sit flush against the walls.

Also, don't leave these out in the sun whilst you toddle off to get some more spray-paint. The floors warp horribly - I had to throw out four out of a batch of nine prints...and the other five are still a bit dodgy...

I was looking for some ready made corridors for Paranoia, and I couldn't find any, so I made my own. They'll also be good for Star Wars RPG games. The floor grids are 25mm by 25mm, so I designed everything else around those. The holes are for 3mm by 8mm magnets.

They're quite long prints (~12 hours each), so it'll take a while to build slices of Alpha Complex...

Oh, and ensure you've got good plate adhesion. I had one corner lift a little, and had to chop off half of one wall and a quarter of the floor. Looks cool though, as if the lab on the floor below had an unscheduled explosive disassembly. Not that anything in Alpha Complex is ever unscheduled...

I used a couple of Walkyrie222's One-sided modular walls (https://www.thingiverse.com/thing:2500965), the small door is from ecaroth's dungeon sticks space station (https://www.thingiverse.com/thing:4268040), large door is from ssuhy65's SciFi Metal Cargo Door (https://www.thingiverse.com/thing:4075350), and the floor plates were adapted from JLEROSSIGNOL's SCIFI FLOOR TILES, BOLTED (https://cults3d.com/en/3d-model/game/scifi-floor-tiles-bolted).