November 13, 2022
Description
PRINT ALL FILES, LEG - 3 TIMES - TRIPOD ;)
reinforced frame, original snapped easily, longer screw to fit all phones,
supports enabled, skirt, 0,2mm layer height, 40 percent infill minimum if you want it to be usable.
Print ball joint on the side, if printed as is it snaps easily on screw, because layers are perpendicular to force applied.
Some CA glue after assembly on heads connection and ball joint screw.
And on legs if you dont them to be foldable, its more rigid this way.
License:
Creative Commons - Attribution - Non-Commercial
kk95063
