###Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

###Custom display base are also available from $5! Contact me to discuss what you want!

###If you like my work, you can support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts

Description

The display is theme with NFS Unbound artwork design and the general art style of the game. Cartoon-ish smokes and graffiti wheels effects are included in my display. I have also included police barrier and spikes strips based on the few gameplay clips we have as of 19/11/22.

The car I designed this display for is Hot Wheels ID Nissan S14 drift, the display will fit all Hot Wheels release of the same casting. Since most Hot Wheels share the same width and wheelbase, it should fit with most Hot Wheels.

But if it doesn't fit and you want the base to fit a specific casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L

The display base is separated into multiple parts for easy printing and colour swap. The parts are:

1. Base

• BaseV3 (Vertical Flat).STL

1. Base back wall:

• BoxBackBuild.STL

1. Front Tag

• CriterionBadge.STL

1. Flat Base

• FlatBaseVerticle - V4.STL
• FlatBaseVerticle - V4 - No Holes.STL

The following parts are optional:

1. Car parts (specially designed parts for the S14)

• Diffuser5.STL
• Splitter4.STL

1. Effects

• Smokes.STL
• Smokes2.STL
• Spikes.STL
• Barrier.STL

Print Settings

Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "BoxBackBuild.STL":

1. Start (Overall background colour, mine is in white)
2. Layer 9 (Further buildings silhoutte, mine is in light grey)
3. Layer 15 (Closer buildings silhoutte, mine is in darker grey)
4. Layer 19 (NFS Unbound logo background, mine is in black)
5. Lyaer 24 ("NFS" lettering colours, mine is in white)
6. Layer 29 ("Unbound" lettering colour, mine is in green)

Filament change layer for colours on "FlatBaseVerticle - V4":

1. Start (Stripe colour, mine is in yellow)
2. Layer 4 (Overall base colour, mine is in black)

Filament change layer for colours on "CriterionBadge":

1. Start (Overall colour, mine is in white)
2. Layer 11 ("Criterion" logo colour, mine is in black)

Optional Parts Print Settings

Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "Smokes.STL & Smokes2.STL":

1. Start (Overall colour, mine is in black)
2. Layer 16 (Smokes inner pattern, mine is in dark grey)
3. Layer 21 (Smokes outline and inner patterns, mine is in yellow)

Filament change layer for colours on "Barriers.STL":

1. Start (Overall colour, mine is in blue)
2. Layer 16 (Diagonal line patterns, mine is in white)

Assembly

The car is tied by wires through the hole in the base

Back plate should slide in nicely into the display base, all the extra effects and props will need to be tape or glue on the flat base yourself.

The front tag will also require some glue or tape to hold it in place.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/

####Custom display base designs are available for $5! Contact me to discuss what you want!