Rubies Mandalorian Blaster Trigger

Here's a separate trigger for the Rubies Mandalorian IB-94 blaster. This is especially useful if you want to put electronics in the blaster.

You need to cut the molded trigger part of the shell and sand everything smooth. The hole in the trigger should be good for a M3 Screw that need to be glued in place or screwed through the outside.

To find the pivot point where to place the screw, align the trigger with the shell so that the grooves on the top and the bottom align with the shell.

For the trigger return, I found it easiest to place a small spring in the bottom part of the trigger guard.