Pipe Planter (Mario Themed) With Drip Tray (2 Versions)

The inner dimensions of this planter are approximately 4" in diameter with a 4" depth. The inner wall of the planter slopes to an upside-down dome shape, with a single hole for drainage. I have also included an STL for the matching drip tray.

I have included 2 separate versions because some people have different preferences/printer capabilities.

Version 1:

• This version is a single STL (v1 Pipe Planter Single Piece) and is best-printed upside down. You will either need supports for the innermost part of the dome,
  or good bridging if you don't want to use supports and desire a clean finish. If you aren't concerned with the finish around the inner part of the drain hole, you can print it just fine with no supports!

Version 2:

• This version is 2 separate STL's (v2 Pipe Planter Piece 1 and v2 Pipe Planter Piece 2) and is meant to be assembled with adhesive afterward. The first STL is for the main body of the planter, and the other STL is for the upper rim of the planter. This will allow you to print the main body right-side-up and avoid using any supports, then just glue the two pieces together afterwards.

**These files are uploaded with a non-commercial license. If you are interested I have a Patreon that gives my subscribers access to all of my files and the permission to with what they please with what comes off their printer: https://www.patreon.com/thinair3D