Battery Dispenser- AAA - AA - 9V

All credits to Bradk3 for the idea.

Battery Dispenser for AAA, AA and 9V batteries, 152,5x127x58mm

I did not like the screw-holes on the side of the original Battery holder, so I decided to redesign the battery holder. The screw-holes are now hidden on the inside.

I had to print the dispencer twice:

• In the first design, my finger could not grip the battery to shove it out.
• I have enlarged the space in the bottom and in the front. The opening is now 1/2 of the length of the battery -4mm for stability. Now it works just fine.

I have added radii to improve stiffness, strength and printability. It can be printed without support except for the Skadis design. Print it straight up, the bottom touching the printbed.

• Update 6-01-2023 Upon request: Added a design for the Ikea Skadis board. John, thanks for testing!

• Update 13-01-2023 Upon request: Added a design with AA an AAA alone. (9V removed) TaLun, thanks for testing and the nice pictures!

• Update 20-01-2023 Upon request: Added a small design. 1xAAA, 2xAA and 1x9V. Heigth reduced to 123mm.

• Update 27-01-2023 Upon request: Added a smaller design without 9V: 2xAAA 3xAA with screw holes and Ikea Skadis hooks.