December 30, 2022
Description
Uses the original 608 parts from the remix.
The spacer was long in my environment.
I made a 53mm spacer for the 5S1 mount and included it.
Use file for 235925.
608_core1.STL
608_core2.STL
608_nut.STL
other necessary parts.
2x 608 bearings
1x 8mm hex bolt
1x M8 nuts
Place the filament guide anywhere between the filament and the sensor.
If not installed, the spool will be pulled and the filament will fall apart.
https://www.thingiverse.com/thing:4869053
Install using nuts like the one above.
2023/02/26 Update
Increased filament guide height.
It can now be centered on the spool.
License:
Creative Commons - Attribution
jack1234ster
