Hello There!

This Pusher Propeller (P-Prop) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. A minimum printer volume of 200mm x 200mm x 200mm will be required to print all parts. In this version of the wing, it is highly recommended that you ONLY fly in calm conditions.

In the link below is the download for the full plane with Version B wing design (newer design). It is required to have at least the fuselage and tail downloaded in order to complete this plane.

Full Plane - Thingiverse Download (Required)

Plane Specs (For LW-PLA)

• Wingspan: 1165 mm or 45.86 inches
• Fuselage: 915 mm or 36.02 inches
• Estimated Print Weight: 208 grams (+/- 10 grams)
• Full load Weight: 378 grams (+/- 10 grams)
• CG Line: Located on Wing-Center in front of the 4th internal structure line (The small visible indented line on the wing-center).
• Propeller: 5 Inch tri/twin blade drone Propeller.
• Motor: 2800 kV Drone brushless motor
• Required Radio: 4-5 Channel Rx/Tx Radio System

Contained in the download you will be given:

• STL Files with internal structures
• Links to the shopping list and flight videos
• An invitation to the DISCORD support server

###Provided through DISCORD:

• Links to provided assembly videos
• Extra build photos to aid any questions towards assembly
• Notifications on any design changes or additional STL files
• Pre-made GCode Files for 200x200mm print spaces
• PrusaSlicer setup tutorial for internal structure printing
• S3D FFF profiles for LW-PLA and PLA Printing

Below are some links for learning more about this plane, it is highly recommended that you check out the DISCORD server where you can find all the current links to build videos, flight videos, and Q/A help.

Shopping List:

####Excel Sheet

Like what you see? Consider supporting me at:

Buy Me a Coffee

Flight Videos:

• Flight1