Yet another filament spool holder - but with hexagons!

My take on an simple filament spool holder.

Two rollers, each with 2x bearing 626 (Do=19mm, Di=6mm, W=6mm).
Connected with a M6x100 (DIN912) hex screw and two washers (Din125, M6) on each side.
In the backpiece two square nuts DIN557 M6 are used.

You can mount two of these units back to back for e.g. dual extruders. Use the extra holes with M6x 25 screws and nuts

Fits for almost every size filament spool (10 - 80mm width) without adjustment, as only one side is guided on the rollers

I added hex patterns for 10% more coolness :)

I included the step files, if you want to change / remix it.

Have fun,
Sebastian