Balisong (cyberpunk Arasaka logo)

This is a Balisong for practice. It has a counterweight installation position. Of course, it feels good without it. For both the shaft and the stop lever, screws or brass rods can be used. Here I use M416 screws as the shaft, but M414 is the most suitable length, and the stop lever uses M38 screws. The counterweight of the blade is a 432 brass rod.

When you insert the counterweight copper rod, you can use a vise to force it in, but it may stretch the material to deform it. It is best to use boiling water or a hair dryer to soften the material so that it can be inserted more easily.